LAUNCH TECH USA 1-877-528-6249 SUPPORT@LAUNCHTECHUSA.COM

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Latest version of the Application V3.00.047 requires manual firmware installation


Senior Member

Status: Offline
Posts: 128
Date: Jan 27, 2015
Latest version of the Application V3.00.047 requires manual firmware installation
Permalink  
 


After completing the installation of the latest version V3.00.047 it will require the installation of the DBS connector Firmware update V11.24.

From the main drop down menu select PROFILE menu then select FIRMWARE FIX. 

Please note at this point the DBS car connector must be activated ON with the docking station or any vehicle DLC connector. 

Once you click on the Firmware Fix tab your screen will show Scanning, Scanning, Scanning.........

Once you can see your serial number on the window, you MUST click on your serial number to make the connection. 

Once its connection you should see a prompt message asking to please wait while your firmware is updating. 

You must wait until the DBS Firmware installation reaches 100% installation. 

Once the Firmware Fix has completed the installation you should be able to continue scanning vehicles. 

Hope this will help anyone with NO communication with the DBS bluetooth connector error message. 

 

 



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard